1028BSB 2018 WORK BOAT Multicat 14.50 m For Sale
FROM DIRECT OWNERS
CARGO AND TANKS CAPACITIES
Deck Load (tons/m2) 5 tons/m2
The unit in the picture has been sold.
We can now offer new building.
Construction may be modified according to Buyers' needs.
Twin screw monohull workboat will be launched end February 2017.
Completion time approximately 10 weeks from receipt of order.
A multi-role workboat, ideally suited to port services, buoy
maintenance, dredging support, pollution clean-up, diving and
general marine construction works. This vessel provides an extremely
stable work platform ideally suited for cargo carrying. This design has
also proven itself to an effective a pollution control vessel, ideally
suited for deploying booms and skimmers.
6 Crew - Displacement (Lightship): 37 tonnes, TBC
Draft (Deck cargo departure condition): 1.1 m
Air Draft: Approx 3m with mast removed
Bollard Pull: 2.7 tonnes approx
Twin screw and conventional shaft with 5 bladed propellers.
1 x Beta Marine 21kVa Generator.
Stern Gear: Grease lubricated stern glands, twin props.
Steering: Hand hydraulic, twin rudder.
Electrics: 24V DC, 110V, 240V & 415V AC 50Hz.
Deck Crane: Bonfiglioli P15000L 4SI
The crane has 402° slewing – not continuous.
Load radios: 11.60m – 890kg, 7.80m – 1440kg, 4.00m – 3200kg
Hull compartmentation to include a dry store and compartments that
can be converted to liquid cargo tanks or additional dry storage. Tank
capacities: 215L FW, 140L BW, 2x 1200L Fuel, 1800L Ballast and 400L
SWL 3.5 tonne lashing points are provided
8x substantially constructed mooring ‘T’ bollards around the vessel.
Heavy duty aircraft tyre fendering along the sides.
The push knees will be fitted with double 150mm rubber D section.
Foundation for retrofit winch (Tugger winch could be up to 9 tonnes)
Steel Grades: Plate – Lloyds grade ‘A’, shot blasted and primed.
Sections – 275S Filler Wire – Flux cored and solid MIG.
The vessel is subdivided transversely with 6mm watertight bulkheads.
The deck is lined with sacrificial softwood to spread point loads over a
|Location:||EUROPE UK [ Map ]|
|Website:||Open website in new window|
|Vessel type:||2018 WORK BOAT Multicat 14.50 m|
|Class Notation:||MCA Cat 3 20nm|
|No. of engines:||2|
|Engine model:||Doosan L136|
|Crusing Speed:||8 Knots|
|Length over all:||14.50m|
Total power output (BHP) 320 bhp
Main Engine(s) (make,type) 2 x Doosan L136
Main Propulsion System Twin screw
Speed cruising 8 knots
Built (year and place) 2017, UNITED KINGDOM
Hull material Welded steel
Length Overall (m) 14.50 m
Length between perp. (m) 14.00 m
Breadth (m) 4.95 m
Depth (m) 1.50 m
Draft (m) 0.80 m
Flag UNITED KINGDOM
Class Society and Notation MCA Cat 3 20nm
All details are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
- DO NOT REPRODUCE, CIRCULATE OR ADVERTISE COMPLETELY OR PARTIALLY ANY OF OUR LISTINGS AND/OR CIRCULATIONS WITHOUT EXPRESSED WRITTEN AUTHORISATION -
Indicated location is approximate general area only.